Slate-Roofing Misconceptions Every Homeowner with a Slate Roof Should Know

11 January 2017
 Categories: , Blog


When people talk about the roofing on their home, you will probably hear mention of asphalt shingles, metal panels, and possibley even wooden shakes. But there is one roofing form that does not get a lot of mention simply because it is much more rare to find in the modern day and age: slate roofing. If you live in a home that has an old slate roof, you really should consider yourself blessed. However, you may feel a little less blessed and a lot more concerned simply because of some common misconceptions about this vintage roofing material. Here is a quick look at a few of the biggest misconceptions about slate roofing and the truth you need to know. 

Misconception: Slate roofing is not as resilient as more modern roofing materials. 

Truth: There is hardly any truth to this at all. In fact, slate roofing can easily outlast some of the most modern roofing forms by a long shot. There are even some slate roofs that are known to be in good, functioning condition even though they have been in place for 150 years or longer. The primary reason this form of roofing is not as popular today is that the materials are harder to obtain, so they are more expensive. Plus, not every roofing contractor is familiar with slate-roofing installation. 

Misconception: Slate roofing is much more prone to leakage. 

Truth: Slate roofing is highly resilient to water and is not too likely to spring a leak unless one of the slate stones is damaged. The slate pieces are fastened to the underlying wooden rooftop with nails or screws and form a total protective sheet that both repels moisture and routes it down the rooftop to the gutters. 

Misconception: Slate roofing is harder to repair than other forms of roofing. 

Truth: Slate roofing may seem more complicated, and it is definitely more unusual. However, as long as you have a contractor who is familiar with this less common roofing, repairs are fairly straightforward. In most cases, damage or problems that come up are relative to a broken slate piece that has to be replaced. This is not a difficult process because each piece of slate is individually attached independent of the rest of the slate pieces. Therefore, a contractor will simply slip one piece of damaged slate out and replace it with a new, undamaged piece. 

Visit sites such as http://www.threeriversroofing.net/ to find a company that does slate roofing near you.


Share